KTSP has been in business since the 1980’s and has seen a lot of changes within the industry. It has survived and adapted to the changing technology however still provides quality direct manual screen print if required.
Screen Printing is essentially placing a mesh screen onto a garment and applying ink through the mesh with a squeegee directly onto the shirt. The shirt is then run through a tunnel dryer at 160 degrees celcius to cure the ink.
Plastisol Transfers can also be printed using the same method except the design is printed in reverse onto wax transfer paper. Adhesive Powder is then applied to the print, run through a tunnel dryer at 160c to cure the ink, and then heat pressed onto the garment.
Screen Printing is best used for quantities of at least 25 prints or more. Set-up of a screen is required for each colour in the design so costs are not effective on runs under 25. If you are unsure on the best method to use for your design then please contact us for the right answer.
You can send your garments directly to our Screen Printing Department for in-house application.
We can also supply you with any of the apparel seen on the attached links on our Suppliers On-line Catalogues.
Please contact us to discuss all your screen printing requirements.
[ Go back ]